Search found 22 matches

by cong
Fri Dec 22, 2017 7:09 am
Forum: Configure Tag
Topic: Connecting USBTraq to Tag
Replies: 1
Views: 879

Re: Connecting Tag to USBTraq

Connecting Tag to USBTraq
- Connect a Tag to a PC using the general-purpose serial cable.
- then follow similar process as in Connecting Master Anchor to USBTraq
by cong
Fri Dec 22, 2017 7:08 am
Forum: Configure Tag
Topic: Select Filter Number
Replies: 1
Views: 766

Re: Select Filter Number

Setting Filter Number for Tag Once connect USBTraq to a Tag, you make select the filter method from the following options: 0- No filtering 1- Tags uses any anchors available. Minimum of anchors is 3 and the maximum of anchors is 8 3- Tag automatically picks 4 anchors that are the closest and contin...
by cong
Fri Dec 22, 2017 6:44 am
Forum: Hardware Installation
Topic: Positioning all Anchors
Replies: 0
Views: 616

Positioning all Anchors

Positioning all Anchors: - all possible Anchors positions as follow All Possible Anchor Positions.jpg - Anchors must be positioned in a counter clockwise fashion. - the Development Kits are shipped in Automatic Mode 1 and Triangle 3D tracking of 1-4 Tags with 4 Anchors. This mode requires Anchors 1-...
by cong
Fri Dec 22, 2017 6:34 am
Forum: Hardware Installation
Topic: General Assembly for Antenna, Anchor, and Light Stands
Replies: 0
Views: 420

General Assembly for Antenna, Anchor, and Light Stands

Anchor and Antenna: - the small antenna is to be used for most applications. - attach the small antenna to each anchor. - do not mix the different antenna types within the application.i.e, use all small antennas or all large antennas together only - for 2D applications, we need 3 Anchors and 3 Ante...
by cong
Thu Dec 21, 2017 4:22 am
Forum: Hardware Installation
Topic: Development Kit Release Features
Replies: 0
Views: 402

Development Kit Release Features

Kit Version 1.0 (release in March, 2016): - this kit can demonstrate tracking of 1 to 4 tags . - the update rate is dependent on the number of Tags tracked. ⋅  up to 200Hz for 1 Tag , 100Hz for 4 Tags . ⋅  each additional Tag adds 2ms latency to all Tags updates. - up to 10 Tags...
by cong
Thu Dec 21, 2017 3:26 am
Forum: Hardware Installation
Topic: Hardware Requirements
Replies: 0
Views: 412

Hardware Requirements

Minimum Requirements: - A computer with a minimum of 1 USB port . - Windows 7 (Windows XP will also work, but may be limited in some areas) - a HMD (Head Mounted Display) is required for Virtual Reality: -- recommendations: ⋅  Gear VR S6 Innovator Edition/ S6 mobile phone ⋅  Gea...
by cong
Thu Dec 21, 2017 2:14 am
Forum: Hardware Installation
Topic: Development Kit Hardware Content
Replies: 0
Views: 519

Development Kit Hardware Content

Development Kit hardware Content.jpg The followings are the components you will receive in Development Kit Suitcase: 1. Anchor (quality 4) - is wireless transceiver that sends and receives measurement distances to other items, such as Anchors and Tags. - Anchor #1 (aka Master Anchor ): has the abil...
by cong
Mon Nov 27, 2017 4:40 am
Forum: Basic Troubleshooting
Topic: Setting up Anchor / Tag IDs via using USBTraq and jumpers
Replies: 1
Views: 782

Setting up Anchor / Tag IDs via using USBTraq and jumpers

The anchor device IDs can range from 0-7 ( max 8 anchors in high speed network ). The tag device IDs can range from 0-15 ( max 16 tags in high speed network ). The tag device IDs are programmed with USBTraq . The anchor device IDs are set using jumpers in a binary fashion . For example: ID0 - no jum...
by cong
Mon Nov 27, 2017 4:38 am
Forum: Basic Troubleshooting
Topic: Diagnostic Test
Replies: 0
Views: 554

Diagnostic Test

1. Setup your anchors in a square with about 3m on each side. 2. Place the lower anchors at about 600mm. 3. Place the upper anchors at about 2000mm. 4. Connect to Tag #1 with USBTraq and select filter method 3. Be sure to select the filter method with the drop down instead of just typing in the numb...
by cong
Mon Nov 27, 2017 4:11 am
Forum: Hardware Installation
Topic: Anchor Addresses
Replies: 1
Views: 605

Anchor Addresses

Anchor addresses are set in a binary fashion. As shown in the attached picture, ADD0 thru ADD3 make up the lower 4 bits of a binary address . ID0 - no jumpers ID1 - 1 jumper on ADD0 ID2 - 1 jumper on ADD1 ID3 - 1 jumper on ADD0 and 1 jumper on ADD1 (1+2) ID4 - 1 jumper on ADD2 . ID5 - 1 jumper on A...

Go to advanced search