Reference Anchor Calibration Procedure

Moderator: mikeh9

cong
Posts: 22
Joined: Tue Aug 15, 2017 8:15 pm

Re: Reference Anchor Calibration Procedure

Postby cong » Tue Nov 21, 2017 5:59 am

Notice:
Make sure your devices have the latest firmware updated.
The master anchor, which is labeled Anchor #1, has a device ID of Anchor0.
Tag device IDs are 1 less than the labeled number. Ex: Labeled Tag#1 has a device ID of 0.

Anchor Calibration Procedure using USBTraq:
1. Setup all anchors as appropriate setting. You may refer to Setup Anchor Positions as http://indotraq.com/forum/viewtopic.php?f=8&t=29 for more detail.
2. Connect USBTraq to Master Anchor. Your may follow the following link for more detail on this procedure:
http://indotraq.com/forum/viewtopic.php?f=8&t=15
3. On USBTraq screen, select the Anchor Calib. tab.
Anchor Calibration USBTraq.png
Anchor Calibration USBTraq.png (41.17 KiB) Viewed 1059 times

4. Input real distances for Real Anchor Distances:
Ex: A0A1: means distance from Anchor0 to Anchor1
5. Select Calibrate First Distance.
6. Optionally, you can calibrate a 2nd distances as follow:
    - Move your anchor to a new location.
    - Input data in Real Anchor Distances.
    - Select Calibrate Second Distance.
7. Click on Write Calibration Values to Device.

Return to “Calibrating Anchors”

Who is online

Users browsing this forum: No registered users and 1 guest