Hardware Specifications

Anchor

  • Internal 2000-2500 mAh li-poly 3.7V battery (rechargeable)
  • USB communication
  • Wi-Fi communication (Optional for Master Anchor Only*)
  • Bluetooth communication (Optional for Master Anchor Only*).
  • Dimension: Approximately 4″ W x 3″ H x 1.4″ D

*must be specified at time of order

devkit_anchor_3

Small Antenna

  • Omnidirectional
  • Approximately 1.6″ W x 1.2″ H

 

HSKT™ Tag

  • USB communication
  • SPI communication
  • I2C communication
  • Serial communication
  • Spare IO for your own purpose
  • Internal tag has a small attached antenna as shown below.
  • External tag has U.FL connectors (50 ohm), with 3″ cable and omni-direction antenna.
    • Other customer supplied antennas with 50 ohm male SMA connectors can also be tested.
  • 500mAh li-poly 3.7V battery (rechargeable) with standard JST connector which is swappable.
  • Approximately 1.18″ W x 1.7″ H x 0.25″ D without battery. Weighs 7.1 grams.
  • Approximately 1.18″ W x 1.7″ H x 0.4″ D with battery. Weighs 17.8 grams.
  • IMU (inertial measurement unit)
    • Update rate 1000 Hz
    • 9 axis
    • Acceleration, Gyroscope and Magnetometer
  • Battery life versus Sample Frequency:
Sample Frequency Battery Life (500mAh)
150 Hz 2 hour
60 Hz 3.5 hours
every 5 seconds 20 hours

*** longer battery life available upon request ***

devkit_board_3

HSVT™ Tag

  • Combines vision module with HSKT™
    technology
  • Includes Linux SBC (single board computer)
  • USB communication
  • Serial communication
  • Powered from USB port or USB Battery
  • Approximately 4″ W x 3″ H x 3″ D