Discover IndoTraq’s cutting-edge HSVT™ indoor 3D position tracking technology in this video. Witness how fiducials seamlessly orient the HSVT™ system to customer coordinates, enhancing precision and usability. These markers, akin to QR codes, encode essential data like 3D location and ID. The video showcases the technology’s exceptional accuracy both with and without fiducials, demonstrating its[…]
Explore the precision of IndoTraq’s HSVT™ indoor position tracking technology in this video. Witness seamless tracking as I move the HSVT™ tag through three distinct 3D points, showcasing its exceptional position and orientation accuracy. Follow along as I repeat the process, highlighting the system’s precision and accuracy. Detailed coordinates and quaternions are displayed at the[…]
We have started the process of updating all our documentation for our indoor position tracking system. The following were documents were updated: High Speed Network Anchor Positions You can also find the latest documentation at https://www.indotraq.com/support.
In this video, I will be introducing the new IndoTraq High Speed GPS Tracking tag which provides accurate outdoor position tracking. It fuses RTK GPS with a 3 axis Inertial Measurement Unit. This fusion results in centimeter level accuracy and high update rates. In part one, we showed the accuracy of the HSGT tag versus[…]
The main software used to setup the Indotraq indoor positioning system has been updated. Multiple changes has been made to the Anchor Positions tab to make it easier to configure the system.
This post demonstrates IndoTraq’s HSGT technology which provides accurate outdoor position tracking. It fuses RTK GPS with a 3 axis Inertial Measurement Unit. This fusion results in centimeter level accuracy and high update rates. In the past, IndoTraq focused mostly on using ultrawide band for position tracking. This requires setting up wireless anchors around the[…]
We have developed an easy way to integrate IndoTraq’s 3D Indoor Position Tracking system with any drone that has an open UART port and understands MAVLink messages. The drone shown in the video below is using the standard PX4 unmodified firmware. The UART port on the IndoTraq tag was connected to the Telem 2 port[…]
We have developed an easy way to integrate IndoTraq’s 3D Indoor Position Tracking system with any drone that has an open UART port and understands MAVLink messages. The drone shown in the video below is using the standard PX4 unmodified firmware. The UART port on the IndoTraq tag was connected to the Telem 2 port[…]
We have developed an easy way to integrate IndoTraq’s 3D Indoor Position Tracking system with any drone that has an open UART port and understands MAVLink messages. The drone shown in the video below is using the standard PX4 unmodified firmware. The UART port on the IndoTraq tag was connected to the Telem 2 port[…]
The IndoTraq Position Tracking System now has a new command to determine the probability if the distance reading from the connected tag to each anchor is a Line of Sight (LOS) or Non-Line of Sight (NLOS) Signal. The most accurate distance readings are obtained during LOS conditions. During NLOS conditions, a small delay is added[…]