IndoTraq’s Autonomous Drone – Part 2

We have developed an easy way to integrate IndoTraq’s 3D Indoor Position Tracking system with any drone that has an open UART port and understands MAVLink messages. The drone shown in the video below is using the standard PX4 unmodified firmware. The UART port on the IndoTraq tag was connected to the Telem 2 port[…]

IndoTraq’s Autonomous Drone – Part 1

We have developed an easy way to integrate IndoTraq’s 3D Indoor Position Tracking system with any drone that has an open UART port and understands MAVLink messages. The drone shown in the video below is using the standard PX4 unmodified firmware. The UART port on the IndoTraq tag was connected to the Telem 2 port[…]

Heat sink added to indoor tracking system tag.

New Tag Cooling Options

IndoTraq has pushed the limits to make the tracking system as fast as possible. This has caused the tags to run at much higher temperatures. The firmware incorporates an automatic temperature shutdown set at 70C. When this is reached, the tag is allowed to cool down to 60C before continuing. This creates a brief pause[…]